P1.2 Indoor Full Color LED Screen, Your Display Partner

P1.2 indoor full-color module is a pixel pitch 1.25mm LED display module with a resolution of 256*128.With the characteristics of flexibility, lightweight design, and easy installation and maintenance, it is widely used in building facades, shopping malls, wedding decorations, and holiday activities.

Why P1.2 is the new benchmark for indoor displays?

• Pixel density:
  • 640,000 dots / square meter, bringing high-definition fine display effect, no flicker, no grain feeling.
• Optimal viewing distance:
  • 0.8m-30m seamless viewing, conference room front row to back row are clear.
• Energy performance:
  • Power consumption per square meter is less than 145W, half of the traditional LCD power saving.
• Extra large viewing angle
  • Horizontal viewing angles of 160° or more; vertical viewing angles of 140° or more;
• High grayscale
  • Grayscale 13~14Bits adjustable.
• Dedicated driver chip
  • Eliminates ghosting, improves low gray color deviation, and has excellent anti-interference capability;

Technical Advantages

• Seamless splicing
  • Traditional LED screen is often due to the obvious splicing seam to destroy the overall picture, and P1.2 module using nano-positioning process and micron-level drive compensation technology, to achieve 0.08mm ultra-precise splicing, even if 30 screens cascade as a single screen as one. More support for free bending splicing, can create 360 ° ring-shaped showroom, wave-shaped digital art wall and other creative shapes.
• Stable operation for 24 hours
  • Equipped with three-dimensional heat dissipation system. Temperature monitoring points are set inside the module, and the fan speed is adjusted in real time to ensure that the temperature difference on the surface is ≤1.5℃ (the temperature difference of traditional programs is generally >5℃). Accelerated aging test by China Saibao laboratory, in the 55 ℃ high temperature, 85% humidity limit environment continuous operation for 2000 hours, brightness attenuation of only 2.7% (national standard requirements ≤ 15%).
• Intelligent Light Sensing System
  • Built-in light sensor, scanning environmental light changes every 10 milliseconds, combined with the human eye comfort curve model, automatically adjust the brightness (≥450nits) and color temperature (3000K-15000K).
• High maintenance efficiency
  • Magnetic front maintenance design, no need to disassemble the frame to replace the module with one hand, short operation time and more convenient operation. Through the intelligent diagnostic system, the cell phone APP can view the voltage/temperature/brightness data of each lamp bead in real time to warn of potential failures.