How to do if the brightness of the Flexible Transparent Screen is uneven after installation?

In the process of using the flexible transparent LED screen, do you also often encounter uneven brightness, don’t worry, it is a small problem!

The first step: check whether the power supply is stable

Flexible transparent LED screen needs a stable power supply; if the power supply voltage is not stable, the brightness of the screen will be displayed unevenly, so first check whether the power cord is connected. At the same time, test the power supply output voltage, and ensure that the voltage is lower than the standard value.

The second step: Check whether there is a problem with the quality of the lamp beads

Part of the lamp bead brightness is low. When the power is on to play a solid color screen, you can observe which areas are dark, dark areas may be the lamp bead problematic position.

The third step: Adjust the control system

We can first open the control software to check whether the brightness adjustment options are correct. If the default brightness parameters are restored and the brightness is still uneven after resending the display, it means that there is a problem with the control system of the flexible transparent LED screen.

The fourth step: Check whether the installation is flat

To check whether the flexible transparent LED screen is installed flat, you can use a level to measure. If it is not level, you can use a wrench to adjust the bracket; if the screen frame is distorted, you can pad the rubber sheet to correct the curvature. After that, testing the brightness again.

The fifth step: inspect light interference

You can pull up the store curtains and raise the screen brightness; if you still see uneven brightness, you can add a shade outside the screen, and you can also change the screen installation angle.

In short, the brightness of flexible transparent LED screen is uneven due to power supply, lamp beads and other factors. If there are uneven brightness problems, you can follow the above steps to check them one by one; if you still can not deal with them, you can find a professional manufacturer maintenance. Of course, routine maintenance is also very important to reduce the occurrence of the above problems.